KANTO Exterior Tile Glue

Product code Updating
Size Updating
Face Updating
Surface Updating
Tile Style Updating
Tile Material Updating
Performance Updating
Product information
Instructions and Terms of Use
KANTO Exterior high-quality tiling adhesive specializes in wall and floor tiling of porcelain tiles, mosaic tiles, ceramic tiles in outdoor area..


Cement, sand, several admixtures

Outstanding advantages:

  1. High adhesion
  2. No shrinkage
  3. Convenient to use, shorten the construction schedule
  4. Environment friendly.

Packing: 20kg/pack

Storage: at room temperature, in a dry place

Shelf life: 1 year

Recommendations: suitable for use on all types of tiles, ceramic tiles, decor tiles with sizes   in the out door area and large size tiles above 60x60cm indoor area.

Hint: Use with Kanto Tile Grout to increase the aesthetics and perfect the tiling space.

Suitable for:

  1. Tiling outdoor areas
  2. Tiling large format tiles, natural stone, basalt, stone
  3. Tiling swimming pools, stone roofs, tile roofs, facade walls, plaster walls, cement board walls.
  4. Tiling on old floors without removing the old tile
  5. Gluing silicate materials of large size and overweight-load,
  6. Paste Polystyrene insulation materials.

a. Instructions for using KANTO Exterior tiling glue

  1. Clean the surface before applying
  2. Mixing ratio with water: 20-30%. 20kg of Kanto interior tiling glue with 4-6 liters of clean water, then stir the ingredients until they are flexible
  3. Spread the glue on the floor with a special tool
  4. Carry out tiling  tiles on the surface of the glue just spread. Tile adjustment time within 15′.
  5. Use a rubber hammer to knock on the tile to fix the brick, wipe it with a cloth after tiling.
  6. Completing the tiling process. After 24 hours, you can walk on the tiled surface.

Hint: use with Kanto Tile Grout to complete the circuit with the gap between the tiles from 2-3mm as recommended by the tile manufacturer.

Time allowed to close the tilling works with glue grout: with the wall after 6h,  on the floor after 24h

b. Consumption:

Consumption is always dependent on the substrate surface profile and roughness, the size of the tiles and the joints between them, as well as on the application technique (single adhesive layer on the substrate, or with an additional ‘buttering’ layer on the back of the tiles. As a guide:

Tile Size (mm xmm) Consumption (kg/m2)
From under 200×200 2-3kg/m2
300×300 4-5kg/m2
400×400 4-5kg/m2
300×600 6-8kg/m2
600×600 6-8kg/m2

c. Technical standards

Characteristics Result Standard level
Tensile adhesion strength (N/mm2) 1,47 ≥1,00
Adhesion strength when pulling after soaking in water (N/mm2) 1,34 ≥1,00
Tensile adhesion strength after heating (N/mm2) 1,240 ≥1,00
Tensile adhesion strength after freezing and thawing cycle (N/mm2) 1,100 ≥1,00
Opening time (N/min) 25 ≥20

According to test method  TCVN 7899-2:2008



back to top